Soldering AUDIO CONNECTORS
Soldering AUDIO CONNECTORS
Match the image with its name
Panavise helping hand
Wire stripper
Soldering iron
Needle nose plier
Match the image with its name
Flush cutter
Bushing
Barrel
Tweezers
What is the main tool used to solder?
Which wire carries the inverted signal?
The positive wire
The negative wire
The ground wire
The shielded wire
Which is the recommended lenght of an XLR cable?
100 meters
30 feet
30 meters
10 meters
What is the solder wire made of?
Silver
Copper
Tin
Iron
When soldering what do wee need to heat up?
The solder wire
The bushing
The barrel
The wires
What kind of connector is this?
A male XLR
A female XLR
A male RCA
A female TRS
What type of connector is commonly used for headphones on most smartphones?
XLR
RCA
3,5mm TRS
1/4 TS
Which part of the XLR connector is soldered to the shield of the cable for proper grounding?
Pin 2 (Hot)
Pin 3 (Cold)
Pin 4 (Neutral)
Pin 1 (Ground)
What is the purpose of a wire stripper
To cut wires to the desired lenght
To crimp connetors onto wires
To measure the voltage of a wire
To remove insulation from electrical wires